Operating instructions
Table Of Contents
- Contents
- About this operating instructions manual
- Environmental protection
- Safety instructions
- Operation
- Open the system
- Settings
- Main switch
- Adjust compressor
- Setting dosing pumps
- Dry foam station
- Wheel cleaner/intensive foam (option)
- Micro emulsion (option)
- Blending device (option)
- Controls
- SB MB standard
- SB MB comfort
- Normal operation
- Open the menu "customer settings"
- Select the parameter you want to set
- Set the parameter with a variable
- Setting a parameter with several variables
- Exiting the menu
- Operating times
- Lighting time
- Fixed holidays
- Non-fixed holidays
- Date / Time
- Coin value
- Programme run times
- System settings
- Setting the dosing pumps
- System
- Hot blowers
- Washing station heater
- Frost protection with lost water
- Emergency frost protection
- External thermostat
- Filling in detergents
- Manual interventions
- Sales indicator
- Frost protection
- Shutting down
- Shutdown
- Function
- Flowchart system with wet foam
- Flowchart system with dry foam
- Attachment kit disconnection from mains (optional)
- Wheel cleaner/intensive foam (option)
- Micro emulsion (option)
- Frost protection 1-tool (option, SB- MB 2 pump Fp only)
- Frost protection 2-tool, wet foam (option, SB-MB 2 pump Fp only)
- 4. Type of water
- Internal frost protection (optional)
- External frost protection (optional)
- Washing place heating (option)
- Monitoring and safety devices
- Overflow valve of high-pressure pump
- Safety valve
- Thermostat mixing valve
- Flame monitoring
- Exhaust thermostat
- Temperature controller
- Temperature controller
- Flow monitor
- Water shortage safeguard
- Motor protection switch
- Hard water sensor
- Pressure switch for RO water shortage
- Level switch Buffer tank is full
- Level sensor pump RO on
- Level switch Buffer tank is empty
- Temperature limiter 4. type of water / warm (option)
- Technical specifications
- Maintenance and care
- Troubleshooting
- Who may remedy faults?
- Fault indication
- Faults shown in the display
- Acknowledge the faults
- Viewing the list of faults
- Viewing the event list
- Interruptions in warm water circulation
- Malfunctions of the washing station heater
- Burner malfunctions with oil-heated devices
- Burner malfunctions with gas-heated devices
- Malfunctions at coin mechanism
- Faults on high pressure pumps
- Disturbed detergent supply
- Malfunctions on the wheel cleaner/intensive foam
- Faults in the compressor
- Faults at the dry foam production (option)
- Interruptions in water preparation
- Faults on the frost protection units)
- Accessories
- Warranty
- Transport
- Storage
- Installing the unit (only for experts)
- Preparing the installation place
- Unpack the equipment
- Aligning the unit and installing it
- Assemble the installation parts
- Water connection
- Electrical connection
- Fuel pipe to the external fuel tank
- Connect the washing station heater and start it up
- Check oil level
- Filling in detergents
- Initial startup
- Turning the base exchanger on
- Start-up of the RO plant
- Check the pressure of rim cleaner (option)
- Check the function of the system
- Starting up the gas burner (option)
- Dimension drawing for CAB model
- Dimension drawing for SKID model
- Dimension drawing for SKID model with WSO upgrade kit
- EU Declaration of Conformity
- Log of high pressure testing
- 15
Washing station 3 and 4 not shown.
1 Fine filter for fresh water (80-100 μm,
option)
2 Locking valve for fresh water
3 Locking water for fresh water for soften-
ing
4 Locking valve for softened water
5 Salt tank
6 Hardness sensor
7 Water counter *
8 Control head of base exchanger
9 Base exchanger bottle
10 RO membrane
11 Flowmeter permeate *
12 Distribution block
13 Restrictor
14 Swimmer tank for cold water
15 Level sensor BUFFER TANK FULL
16 Level switch PUMP RO ON *
17 Level sensor BUFFER TANK EMPTY
18 Locking valve for permeate tank
19 Buffer tank for permeate
20 Pressure switch for RO water shortage
21 Manometer working pressure
22 RO pump
23 Discharge valve for softened water
24 Active carbon filter
25 Ultra-fine filter *
26 Solenoid valve in salt tank
27 Solenoid valve for cold water
28 Solensoid valve for permeate
29 Bypass valve semi load with throttle,
only for high pressure module type 908
30 High pressure pump
31 Overflow valve
32 Hand-spray gun with washing brush
33 Dosing pump
34 Pressure switch air (optional)
35 Compressor
36 Suction hose for detergent
37 Detergent filter, foot valve
38 Solenoid valve for warm water
39 Drain valve
40 Water shortage safeguard
41 Swimmer tank for warm water
42 Circulation pump for warm water
43 Temperature sensor warm water
44 Flow indicator
45 Temperature sensor for burner outlet
46 Burner inclusive flow-type heater
47 Fuel tank (Option)
48 Burner blower with fuel pump
49 Solenoid valve for fuel
50 Exhaust thermostat
51 Flame indicator
52 Blending device (option)
Double tool version (Option)
A Solenoid valve for high-pressure
B Solenoid valve for foam
C Hand-spray gun with spray pipe
D Washing brush
* Only for SB MB standard
Function
Flowchart system with wet foam
17EN