Operating instructions
Table Of Contents
- English
- Contents
- Environmental protection
- Danger or hazard levels
- Device elements
- Symbols on the machine
- Proper use
- Safety instructions
- Safety Devices
- Start up
- GFCI INSTRUCTIONS
- Operation
- Open/close the hood
- Opening/closing the trigger gun
- Replace the nozzle
- Operating modes
- Turning on the Appliance
- Interrupting operation
- Select spray type
- Operation with detergent
- Cleaning
- Operating with cold water
- Operating with hot water
- After operation with detergent
- Turn off the appliance
- Storing the Appliance
- Frost protection
- Shutdown
- Storage
- Transport
- Care and maintenance
- Troubleshooting
- Appliance is not running
- Device is not building up pressure
- Device continuously turns on and off while hand spray gun is open
- Device turns on and off while hand spray gun is closed
- Device leaks, water drips from the bottom of the device
- Device is not sucking in detergent
- Burner does not start
- Customer Service
- Warranty
- Accessories and Spare Parts
- Technical specifications
- Français
- Table des matières
- Protection de l’environnement
- Niveaux de danger
- Éléments de l'appareil
- Symboles sur l'appareil
- Utilisation conforme
- Consignes de sécurité
- Dispositifs de sécurité
- Mise en service
- DISJONCTEUR DIFFERENTIEL
- Utilisation
- Ouvrir/fermer le capot de l'appareil
- Ouvrir/fermer le pistolet de pulvérisation à main
- Remplacer la buse
- Modes de fonctionnement
- Mettre l'appareil en marche
- Interrompre le fonctionnement
- Choisir le type de jet
- Fonctionnement avec détergent
- Nettoyage
- Utilisation avec de l'eau froide
- Utilisation avec de l'eau chaude
- Après utilisation avec un détergent
- Mise hors service de l'appareil
- Ranger l’appareil
- Protection antigel
- Remisage
- Entreposage
- Transport
- Entretien et maintenance
- Assistance en cas de panne
- L'appareil ne fonctionne pas
- L'appareil n'établit aucune pression
- Lorsque la poignée-pistolet est ouverte, l'appareil ne cesse de se mettre sous et hors tension
- Lorsque la poignée-pistolet est fermée, l'appareil ne cesse de se mettre sous et hors tension
- L'appareil présente un fuit, de l'eau s'écoule de l'appareil par le bas
- L'appareil n'aspire pas de détergent
- Le brûleur ne s'allume pas
- Service après-vente
- Garantie
- Accessoires et pièces de rechange
- Caractéristiques techniques
- Español
- Índice de contenidos
- Protección del medio ambiente
- Niveles de peligro
- Elementos del aparato
- Símbolos en el aparato
- Uso previsto
- Indicaciones de seguridad
- Dispositivos de seguridad
- Puesta en marcha
- Instrucciones del Interruptor de Circuito de Avería por Puesta a Tierra
- Manejo
- Abrir/cerrar capó del aparato
- Abrir/cerrar la pistola pulverizadora
- Cambiar las boquillas
- Tipos de servicio
- Conexión del aparato
- Interrupción del funcionamiento
- Selección del tipo de chorro
- Funcionamiento con detergente
- Limpieza
- Servicio con agua fría
- Servicio con agua caliente
- Después del funcionamiento con detergente
- Desconexión del aparato
- Almacenamiento del aparato
- Protección antiheladas
- Parada
- Almacenamiento
- Transporte
- Cuidados y mantenimiento
- Ayuda en caso de avería
- El aparato no funciona
- El aparato no genera presión
- El aparato se apaga/enciende continuamente cuando la pistola está abierta
- El aparato se enciende y se apaga continuamente cuando la pistola está cerrada
- El aparato tiene fugas, el agua gotea del aparato por abajo
- El aparato no succiona detergente
- El quemador no se enciende
- Servicio de atención al cliente
- Garantía
- Accesorios y piezas de repuesto
- Datos técnicos
– 2
Illustration
1 High pressure hose EASY!Lock
2 Cable clamp
3 Pouring vent for fuel
4 Filling level display
5 Storage compartment for nozzles
6 Power supply
7 High-pressure pump
8 Water supply set
9 High-pressure connection EASY!Lock
10 Storage for spray pipe
11 Water connection with filter
12 Support
13 Carrying handle
14 Cover
15 Power switch
16 Burner
17 Support for spray lance
18 Detergent suction hose with filter
19 Nameplate
20 Cover lock
21 Storage compartment for hoses
22 Push handle
23 Marking of the nozzle
24 Triple nozzle EASY!Lock
25 Spray lance EASY!Lock
26 Trigger gun EASY!Force
27 Safety latch of the hand spray gun
28 Safety lever
29 Trigger
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at per-
sons, animals, live electrical
equipment or at the appliance
itself. The high pressure cleaner must only
be used while standing.
– Cleaning of: Machines, Vehicles, Struc-
tures, Tools, Facades, Terraces, Gar-
dening tools, etc.
– The high pressure cleaner must only be
used while standing.
– Never leave the appliance unattended
as long as it is in operation.
DANGER
Risk of injury! Follow the respective safety
regulations when operating at gas stations
or other dangerous areas.
Quality requirements for water:
ATTENTION
Only clean water may be used as high
pressure medium. Impurities will lead to in-
creased wear and tear or formation of de-
posits in the appliance and accessories.
If recycled water is used, the following limit
values must not be exceeded.
Device elements
Colour coding
Symbols on the machine
Proper use
Please do not let mineral oil contaminated
waste water reach soil, water or the sew-
age system. Perform engine cleaning and
bottom cleaning therefore only on speci-
fied places with an oil trap.
pH value 6,5...9,5
electrical conductivity * Conductivity
fresh water
+1200 µS/cm
settleable solids ** < 0,5 mg/l
total suspended solids *** < 50 mg/l
Hydrocarbons < 20 mg/l
Chloride < 300 mg/l
Sulphate < 240 mg/l
Calcium < 200 mg/l
Total hardness < 28 °dH
< 50 °TH
< 500 ppm (mg
CaCO
3
/l)
Iron < 0,5 mg/l
Manganese < 0,05 mg/l
Copper < 2 mg/l
Active chloride < 0,3 mg/l
free of bad odours
* Maximum total 2000 µS/cm
** Test volume 1 l, settling time 30 min
*** no abrasive substances
7EN