Operating instructions

22
Maintenance
Service Schedule
MAINTENANCE
BEFORE
EACH
WORK
PERIOD
AFTER EACH
WORK
PERIOD
50 HRS
100
HRS
200
HRS
250
HRS
Check water level of batteries after
charging; add distilled water if necessary
*
Check that the vacuum box lid seal tightly *
Visually check for damaged or worn tires. *
Check vacuum hose connections. *
Check hoses for debris buildup. *
Empty debris tray *
Check pedal(s), brake and steering for
proper operation
*
Check vacuum bag fullness and change
if necessary.
*
Clean brushes and check wear. *
Remove bearing cap. Clean bearings
and cap.
*
Empty debris tray *
Charge batteries.
*
Clean off top of batteries. *
Check battery cells with hydrometer.
(Wet cell only)
*
Check battery connections are tight. *
Clean battery cases and compartment. *
Clean and check drive tension chain for
wear and tension.
*
Clean chains, cables and pulleys for
brush deck lift.
*
Check all motors for carbon brush wear. *
Check motor commutators. *
Check steering chain tensioner. *
Replace Filter *
8.644-676.0 Operator’s Manual - iVac 24 ATV