Operating instructions

53
Maintenance
3. Press brush release. Brushes will drop downward.
Remove old brushes.
4. Slide new brushes into receptacle at far side of
deck, lift upward and snap into position. Ensure
brushes are secure.
5. Close side squeegee and latch securely.
Removal or Installation of Debris Bin
(Cylindrical)
NOTE: On models with chemical metering system,
scrub deck needs to be lowered to remove debris bin.
1. From right side of machine, lift debris bin and sllde
out.
2. Re-install in reverse order.
Brush
Release
86446740 Operator’s Manual CS20 iScrub
Debris Bin
Slide out