User's Manual

VERSA REMOTE

ERROR CODE CHART

EC01 - NO SIGNAL FROM PENDANT OR PENDANT POWER OFF

EC02 - SHORT OR OPEN CONNECTION ON SOURCE LOWER OUTPUT

EC03 - SHORT OR OPEN CONNECTION ON SOURCE RAISE OUTPUT

EC04 - SHORT OR OPEN CONNECTION ON C/S AXLE DOWN OUTPUT

EC05 - SHORT OR OPEN CONNECTION ON C/S AXLE UP OUTPUT

EC06 - SHORT OR OPEN CONNECTION ON S/S AXLE DOWN OUTPUT

EC07 - SHORT OR OPEN CONNECTION ON S/S AXLE UP OUTPUT

EC08 - SHORT OR OPEN CONNECTION ON DETECTOR LOWER OUTPUT

EC09 - SHORT OR OPEN CONNECTION ON DETECTOR RAISE OUTPUT

EC10 - SHORT OR OPEN CONNECTION ON LOWER BOOM LOWER OUTPUT

EC11 - SHORT OR OPEN CONNECTION ON LOWER BOOM RAISE OUTPUT

EC12 - SHORT OR OPEN CONNECTION ON UPPER BOOM RETRACT OUTPUT

EC13 - SHORT OR OPEN CONNECTION ON UPPER BOOM EXTEND OUTPUT

EC14 - SHORT OR OPEN CONNECTION ON ROTATE CCW OUTPUT

EC15 - SHORT OR OPEN CONNECTION ON ROTATE CW OUTPUT

EC16 - SHORT OR OPEN CONNECTION ON KNUCKLE FOLD OUTPUT

EC17 - SHORT OR OPEN CONNECTION ON KNUCKLE UNFOLD OUTPUT

EC18 - SHORT OR OPEN CONNECTION ON UNLOADER VALVE OUTPUT

EC19 - SHORT OR OPEN CONNECTION ON E-STOP OUTPUT

EC20 - SIGNAL RECEIVED FROM TRANSMITTER WITH INCORRECT ID CODE

EC21 - REMOTE SYSTEM JOYSTICK PROBLEM

EC22 - REMOTE SYSTEM JOYSTICK NOT ALLOWED

EC23 - DATA LINK PROBLEM BETWEEN CONTROLLERS