Installation and Operation Manual

MCT247 TRANSCEIVER
5
Application Requirements:
A) Power the MCT247
Transceiver with 3.3VDC
nominal voltage, with
peak current draw of
150mA.
B)Do not remove the shield
on the MCT247.
C) If you use something other
than the wire antenna,
the unit needs separate
approval.
D) The MCT247 can be
installed in mobile or
portable applications.
See Part 2.1091 for
definitions of mobile,
portable and fixed
applications.
E) Do not operate the MCT247
without an antenna.
F) Documentations: In the
host’s User Manual
include the following:
a. That there are no user
serviceable parts in
the radio modules.
They should not
remove or install radio
modules.
b. The “Instructions To
The User” section.
c. The “Industry Canada
Statement”.
d. Include in the manual,
“This device is granted
for use in Mobile and
Portable
configurations, with no
restrictions on
antenna placement for
exposure purposes.”