Installation and Operation Manual

MCT247 TRANSCEIVER
4
INSTALLATION
1) Solder the MCT247
transceiver directly to the
host’s compatible
connector.
2) Print and attach the label
as shown below:
3) Place a label on the outside
of the host enclosure in a
visible area. On the label,
include the following:
“Contains FCC ID: P4U-
MCT247” and “Contains IC:
4534A-MCT247”
4) Connect the appropriate
antenna. A ¼ wavelength
wire antenna.
5) Once integrated into a final
product, use a spectrum
analyzer to make sure the
product still complies. Look
for:
a. Peak Power < 20dBm
b. Other peaks above
1GHz should be <
74dBuv/m. Below
1GHz, they should be
< 40dBuV/m.