Installation and Operation Manual

MCT247 TRANSCEIVER
11
EUROPE
CE NOTICE
This device has been tested and certified for use in the European
Union. See the Declaration of Conformity (DOC) for specifics.
If this device is used in a product, the OEM has the responsibility to
verify compliance of the final product to the EU standards. A
declaration of Conformity must be issued and kept on file as described
in the Radio and Telecommunications Terminal Equipment (R&TTE)
Directive.
The ‘CE’ mark must be placed on the OEM product per the labeling
requirements on the Directive.
Declaration of Conformity (DOC)
This DOC can be downloaded from the www.kar-tech.com.