SmartVision SmartVision Lite USER GUIDE SmartVision & SmartVision LITE – User Guide (Rev. 2.
Introduction Congratulations on purchasing SmartVision or SmartVision Lite. SmartVision is the first Android Smartphone especially designed for people with low vision and visual impairment. SmartVision combines a physical keypad, a full voice interface, and a touchscreen, making it a fully accessible device. SmartVision is the latest generation smartphone that provides you with a fully adaptive interface and functionalities that are easy to navigate for everyday use.
Content of the box SmartVision by KAPSYS includes: A battery A 220/110V - 5V USB mains charger A docking station for charging (1). A USB / micro USB cable A lanyard Two stereo earphones with microphone and a push-to-talk button. A protective case(1). This list of accessories may vary depending on the country, device configuration or model version. (1) : Not available on SmartVision Lite. SmartVision & SmartVision LITE – User Guide (Rev. 2.
Table of Contents Introduction Content of the box Introducing SmartVision Installation Keypad, Touchscreen and Voice control Accessibility Mode Voice interface Screen reading Home screen The notification status bar Applications Favorites Telephone Messaging E-Mail Settings People SOS Function Kapten(1) Assistance Calendar Alarm Clock Camera Calculator Gallery Video Player Magnifier Colors Detections Sound recorder Music Browser NFC(1) OCR(1) FM Radio Search Downloads Legal notice and Warranty Troubleshootin
Introducing SmartVision Front panel The numeric keypad at the bottom part of the front panel enables you to dial a phone number or type characters for text messaging using multi-tap mode. 4 control keys are located above the keypad: - "OK" key to pick up a call, or confirm your entry. - The two arrow keys "" allow to scroll or browse within a menu or a current page. - "C" key to end a call or clear an entry.
The voice control key is located on the right side of your SmartVision. Press briefly this key to send a voice command and press and hold if you want to write a message through dictation. The mini-USB port on top of the handset provides for connection to a PC or to a mains charger using the cable included in the box. Bottom: Connection terminals at the bottom of the handset are used to connect to a docking station to charge the battery, and a microphone.
Rear: The emergency orange button is located on the back panel top left. Push down this button to start an emergency instance. On the right of this SOS button are found the camera lens and a port for amplified listening. SmartVision & SmartVision LITE – User Guide (Rev. 2.
Installation Inserting the SIM Card The SIM Card is issued by a telephone service provider when you take out your telephone contract. Please note: only Mini-SIM (2-FF) Cards are supported by SmartVision. If you have a different SIM card, please ask your telephone service provider to replace it with a Mini SIM. It is recommended to change the format of the SIM card rather than using an adapter. Inserting the SIM Card: 1.
The battery Inserting the battery: 1. Insert first the bottom of the battery into the slots. 2. Snap the battery into place. 3. Put back the rear panel fitting the top part first. 4. Snap firmly and close your device. SmartVision & SmartVision LITE – User Guide (Rev. 2.
Charging the battery The battery you purchased with your SmartVision is not fully charged. Before using the device, we recommend that you charge the battery for at least 4 hours. You may subsequently charge it as needed and depending on your use and the available charge of the battery. You may check the icon located in the top right bar at anytime to know how much charge is available in the battery.
Switch ONOFF your SmartVision Press and hold the "On Off" button (on the top of the device) to start your SmartVision. Release the button as soon as the device vibrates. Please note: if the device does not start, please check if the battery has been properly installed, if not, please repeat the installation procedure. Press and hold the "On Off" button to switch off your SmartVision. A screen called “Main menu” appears. Click on "Power off" and confirm.
Unlocking the PIN on the SIM Card The SIM Card has a 4 digit identification code called PIN. PIN helps you lock your SIM Card to avoid fraudulent use of your SmartVision. To unlock the SIM Card and access the various functions in your SmartVision, enter your PIN using the keypad then confirm with "OK". If you click on "Dismiss" from this screen, you still have access to all the features of the device but no communication functions provided by your telephone service provider are available.
Keypad, Touchscreen and Voice control The three interfaces or operating modes by SmartVision: - The Keypad operating mode is for those who know how to easily handle keys and buttons on a mobile phone. To become familiar with SmartVision keypad, please refer to the section where functions specific to each key and button are described in detail. (See page 5).
The alphanumeric keypad located under these control keys, is presented in three rows of number keys organized from left to right as follows: - First row: 1, 2, 3, star keys. Second row: 4, 5, 6, 0 keys. Third row: 7, 8, 9, # keys. The alphanumeric keypad (key 1 to #) is used to enter text or characters depending on the input field. Each key gives access to several characters: number key "2" b, c, 2, A (capital), B (capital), C (capital).
Selecting or activating an item on the screen: Make a short key press or click on an item to select it, confirm an action, or display the virtual keypad in the provided input field. Make a long key press to get more options for the selected item (context menu). Scrolling a list: Scroll up and down a displayed list by sliding your finger up and down without removing your finger of the screen. Zooming in/out (available on specific applications such as Image Viewer, Email, etc.
Accessibility Mode This section describes specific commands and gestures as well as keypad shortcutshot-keys to help you control and interact with your SmartVision when the accessibility mode is enabled (default setting). From the home screen, click on "Settings" to enable or disable the accessibility mode, then click on "Accessibility" and check or uncheck the "Explore by touch" option in the list.
Edition mode: SmartVision allows a quick and easy editor mode. This mode allows navigating into an input area to modify or insert a character or a word.
Gesture control of the Touchscreen: How to have an audio description of what is on the screen, place your finger on the screen, slide it from right to left then from left to right. You will hear a voice over description of items displayed on the screen. How to browse and activate items on the screen, move your finger about the screen. The text-to-speech feature will tell you which item your finger is hovering over. To activate this item, press "OK" key without removing your finger from the screen.
How to move back to the previous display, place your finger on the screen, slide it down then left without removing your finger of the screen. You can also slide your finger down and to the right, you will hear the text-to-speech feature say "Back". Then, press the "OK" key without removing your finger from the screen. How to access the menu or the options for the active application, place your finger on the screen, slide it up then right without removing the finger.
How to open the "Notification" status bar, place your finger on the screen and slide it from left to right and down. The voice over feature will indicate the status of your smartphone (Wi-Fi, Bluetooth, GPS, etc...), as well as the last ten notifications. SmartVision & SmartVision LITE – User Guide (Rev. 2.
The virtual keypad To enter text into the input field, you can use the real keypad but also the virtual keypad. To access the virtual keypad, move your finger until you touch the input field, then press "OK" key without removing your finger from the screen. The virtual keypad appearance changes from numeric to alphabet to suit the content of SmartVision’s input field.
Voice interface Free yourself from the keypad, either physical or virtual. To activate the voice mode, look for the voice control key located on the right side of your handset, press it. SmartVision’s voice interface integrates the latest generation voice recognition technology which makes it the major asset of this smartphone.
Controlling the screens through voice commands The voice control feature enables audio description of all texts displayed on your SmartVision freeing you from using the physical or non physical keypad. 1. Press and release the voice control key (short key press), a signal tone is heard and a "Voice Command" window opens. 2. Pronounce clearly the displayed text to activate screen reading, for example, an application name, an item in a list.
2. The "Voice Command" window opens, say clearly the keyword, for example "What time is it?" The answer is given by SmartVision’s text-to-speech functionality, for example: "It’s1:46pm". Here are two additional examples of voice commands. You want to make a call to Paul Thomas 1. Press briefly the voice control key. A beep sounds. You are prompted to dictate a command. 2. There are two possible commands: - "Call Paul Thomas", if this contact has been added to your "People" list.
Voice command keywords The following voice commands have been implemented in the product and are the only words recognizable by SmartVision. SmartVision keywords fall into three categories: - Keywords to get information about your smartphone’s current status. - Keywords to enable or disable a setting or an option. - Keywords to manage commands and options within an application. Keywords about SmartVision’s different statuses What time is it? Gives the current time. Date? Gives the current date.
Keywords used for activating a function or a setting Menu Opens the menu of the current application. Home Restores the main screen. Back Displays the previous screen. Notifications Opens the notification status bar. Activate GPS Enables GPS localisation. Deactivate GPS Disables GPS localisation. Activate Wi-Fi Enables the Wi-Fi. Deactivate Wi-Fi Disables the Wi-Fi. Activate Bluetooth Enables the Bluetooth. Deactivate Bluetooth Disables the Bluetooth.
Speech-to-text or Dictation mode The voice interface also makes it possible to input text in a text field using speech-totext. This feature is particularly useful for message or email writing, web searching or voice dialling a phone number. 1. When a text field is displayed, the smartphone is ready for dictation mode. 2. Press and hold the voice control key while dictating your text, all the way through.
Please note: to add punctuation marks (,? ! …), you must pronounce the name of the punctuation mark you want. Example: "Would you like to come over for lunch next Sunday question mark". Please note: Speech-to-text can be used for up to 30 seconds at a time. Warning: Speech-to-text feature requires a data connection such as Wi-Fi or 3G. If you are not connected to a data network or if the connection speed is too low, the service will not be available and you will get the following alert.
Screen reading SmartVision is equipped with a speech synthesizer that reads the content of the screen to you. Screen reading occurs in the following instances: - A new screen appears, the title and the highlighted item are read back to you. - A new item has been selected. - A command has been executed, such as enabling an option. - An unexpected event occurs, such as the phone going into screen off mode or receiving an incoming message.
Home screen The home screen operates like a start menu from which you can start any application you need. To go back to the home screen, press the “Home” key the display. , the middle button below The Home screen presents SmartVision’s six basic functions. "Phone" is an application for making calls, recording missed calls and accessing your voicemail. "Messaging" is an application for sending, reading SMS/ MMS (short message with multimedia attachments such as images, photos or videos, etc…).
Whenever one of the above icons appears flagged with a red bubble that contains a number, it means there is one or more events for that application (such as missed calls, or incoming messages). The notification status bar The status bar is the first line of icons located on top of the display. Status icons are on the right and alert icons (related to the various applications) are on the left.
The status bar gives access to the panel of notifications where all alerts and events on your smartphone have been reported. Thanks to these notifications, you know exactly what event has occurred on your smartphone. To flick the panel open, slide your finger from the top of the display towards the bottom, your finger must remain on the screen throughout the command for it to work.
Applications From the home screen, press the "Applications" icon and find a list of all the applications available in your SmartVision. These applications are listed by alphabetical order. To start an application, scroll the list until you reach the desired application and select it. Please note: you can also use the voice control feature to start an application, by sending a "Start application" command followed by the application name.
Favorites The "Favorites" application is SmartVision’s most convenient functionality and is available from the home screen. It works like a directory in which your preferred applications or the ones you use most frequently are stored. Creating a favorite For example, add the "Calculator" application into "Favorites". 1. From the home screen, select "Applications" 2. Scroll the list until the "Calculator" . application is highlighted. 3. Press and hold the "OK" key of the keypad to open the context menu.
The "Calculator" application can now be directly accessed from the "Favorites" screen. Managing Favorites To remove a Favorite application, access the "Favorites" menu, click on the application to be removed, press and hold the keypad "OK" key. Click on "Remove from favorite" in the context menu then confirm deletion with "Yes". To organise your applications within the list, click on "Up into the list" or "Down into the list" option from the context menu.
Telephone The "Phone" of options. application by SmartVision is a very user friendly feature with a lot How to make a call? 1. From the Home screen, click on "Phone" appears. icon, the application main screen 2. You can either type your correspondent’s number using your telephone keypad, or retrieve a number from the "People" application, a contact name from "Favorite", or from the call "History". 3. When the number or contact name has been entered, press the keypad "OK" key to send the call. 4.
During a call, the following three icons will show at the bottom of the screen, offering you 3 additional options: Turn on the loudspeaker (hands free mode). Mute the microphone. Show the virtual keypad, to key in digits when using an automated answering service, for example The above options are also available using the "Menu" button.
Managing phone calls The "Phone" application allows you to manage your phone numbers by priorities. When in the "Phone" application, press the "Menu" button. A menu appears: The "Quick Dial" option allows you to set your preferred numbers for direct access from the keypad. For example, if you wish to save a phone number that you use very often for a quick access by assigning to number key “2” of the keypad. First, click on "Quick Dial", then click on line two to choose 2.
How to answer a call? When you receive an incoming call, a ringtone is heard. The unit immediately shows two keys: "Accept" and "Refuse", even in screen off mode. The caller’s number appears in large format on the top of the screen. If the caller is a contact that has been added to your list of "People", his/her name will be shown instead of the phone number. Press the "OK" key of the keypad or the "Accept" key on the screen if you want to answer.
Whenever a caller leaves you a voice message, the message will show in the status bar with the Voicemail symbol. To listen to your voice message, simply call your voicemail service making a long press on number key"1" from the physical keypad. Call History The "History" menu stores calls recently made or received by you. They are listed from newer to older. This feature presents two advantages: it keeps you informed of any call you have missed, and gives you direct access to phone numbers and contacts.
Calling a number or a contact from the Call History To call back a number or a contact from the Call History, simply click on the number/contact from this screen, and the call is made instantly. At the end of the call, press the "C" key of the keypad or press the “Hang up” icon to end the call. You can also call back a missed call from the notification panel - , as follows: Open the notification panel. Select the missed call alert, you will instantly reach the "History" menu of your smartphone.
Messaging The "Messaging" application lets you send and receive short messages or SMS and MMS (text messages containing a multimedia item such as an image or a video, etc.) How to send a message? 1. From the Home screen, click on the "Messaging" 2. Click on "New Message" on top of the screen. icon. 3.
5. Type your message in the text field using the physical keypad, the virtual keypad or speech-to-text (press and hold the voice control key to dictate). 6. When the entry is completed, click on "Send", your message will be sent and a conversation is opened. Please note: if you wish to attach an image or a video to your message, click on the attach symbol at the screen bottom left, or press the "Menu" button. SmartVision & SmartVision LITE – User Guide (Rev. 2.
Messaging menu Options Click on the "Messaging" icon from the Home screen. Press the "Menu" button to access the "Messaging" application various options. The options below let you configure the "Messaging" application to suit your own preferences. - "Delete all threads": deletes all threads stored on your smartphone. - "Search": allows search of a message on your smartphone.
To read your received messages from the home screen, click on "Messaging" icon or on "New message" from the notification panel. Messages sent or received are listed by recipient or "discussion thread". Discussion threads with unread messages are placed on top of the list with a blue triangle . To show the content of the message, click on the discussion thread you wish in the list.
E-Mail The "E-Mail" application lets you send and receive emails from your email account. The "E-Mail" application by SmartVision will not work unless you have an existing email account with an email service provider. Email account setup When opening the "E-Mail" application for the first time, you will need to set up your email account. You will need to have your email account information handy such as your email address and password. From the home screen, click on "E-Mail" appears. 1. 2. 3. 4. icon.
Sending an email 1. From the home screen, click on the "E-Mail" displayed. 2. Click on "Compose". application. The Inbox is 3. Enter the recipient into the "To" field, the subject of your email into "Subject" and then the full text into "Compose email" text field. For additional options – insert an attachment, add more recipients, etc. – please refer to the instructions below. 4. Click on "Send" when you have completed the message, your Email is sent.
Receiving and reading an email When you receive an email, the home screen will show the Email icon flagged with a red bubble. This will also be notified to you via the status bar (provided the "Email notification" option has been enabled when you set up your email account). To access the Inbox and read your incoming emails, click on the "E-Mail" application from the Home screen, or on the new email notification from the notification panel. Click on the new email.
Delete an email You can delete an email unitarily or by group. To delete an email unitarily, simply open the email you want to delete and select "Delete" from "Menu". It is also possible to delete an email without consulting him. In this case, select from the list of emails, the email you want to delete and perform a long press on the "OK" button. Then select "Delete". To delete a group of emails, press "Menu" from the list of emails and select "Start multiple selection".
Settings The parameters and settings for your SmartVision can be found under the "Settings" application. This application can also be accessed from the home screen in order to enable and disable specific functions or modify existing settings. SmartVision comes with a number of editable default settings such as the time setting, the language option, the display format, etc. Editing a setting To edit a setting: 1. From the home screen, click on "Settings" . The list of settings appears. 2.
- "Location services": activate and manage localisation services (GPS and network). "Security": manage security settings (PIN, lock screen, password, …). "Language &input": configure display and keyboard language. "Backup & reset": remove personal data and restore default settings. "Date &time": set date and time on the unit(time zone, time format …) "Schedule power on off": schedule automatic turn on/ off. "Accessibility": configure accessibility mode settings.
- "Caller Id alert": announces the name or phone number associated with an incoming call. "Voicemail alert": announces an incoming message to your voice mail "Stop on shake": stops text-to-speech mode by shaking the handset "Stop on proximity": stops text-to-speech mode if the smartphone is closed to your ear. "Speak when locked": enables text-to-speech when the unit is in screen off mode. The other accessibility typical options are: - "Large text": increases the font size.
Connecting to Wi-Fi 1. From the home screen, click on "Settings" 2. Press the ONOFF connection. icon, and on "Wi-Fi". switch on the screen top right to enable Wi-Fi The list of available Wi-Fi networks appears. 3. Choose the network you wish to connect to. 4. If you wish to connect to a secure Wi-Fi network, please enter a password. 5. Click on "Connect", an icon will appear in the status bar indicating that the unit is connected to the Wi-Fi network.
Adjusting the ringtone 1. From the home screen, click on "Settings" 2. Select "General". icon, then on "Audio profiles". 3. Select "Voice call ringtone". 4. Select to listen to a ringtone. 5. Once your choice is made, press the "Menu" to save your change. button, then click on "Apply" Please note: to adjust the volume on your SmartVision, use the up and down volume keys on the left side of your handset. The volume control will apply to the audio source currently in use.
Airplane mode The airplane mode disables all sources of radio frequency on the device (Wi-Fi, Bluetooth, cellular network, etc.). To activate the "Aeroplane mode", press and hold the "On Off" key. "Main menu" is displayed. Select "Aeroplane mode". You will be notified that this mode is activated by the pictogram in the status bar. Please note: airplane mode can also be activated from the "Settings" application, by selecting "More…" option, then "Airplane mode".
Updating the SmartVision Updates for your smartphone will be notified on the home screen with the red bubble over the "Settings" icon. To activate the update, click on "Settings" . Select "Download". Download will start automatically and will last for about 30 to 40 minutes depending of your network bandwidth. Subsequently, the device will reboot automatically until “Home screen” is displayed and announced. Note: - You must have data connection, Wi-Fi or 3G enabled to download the software update.
People The "People" application acts as a phone book in which all your contacts are found. This application has been placed by default in the "Favorites" list giving you a direct access to the "People" list. How to create a contact You wish to add a new contact. 1. From the home screen, click on "Favorites" icon, then on "People" . 2. Select "Add Contact", a "New Contact" record appears. 3.
Editing a contact 1. Scroll the list until you reach the contact to be edited, select this contact. 2. The contact’s record is displayed. 3. Press the "Menu" button, and click on "Edit". SmartVision & SmartVision LITE – User Guide (Rev. 2.
4. The contact record is displayed in edit mode allowing you to modify, add or delete any field. 5. Save your changes by clicking on "OK" at the bottom of the list, or press the "Menu" button, and click on "Save". Please note: if you wish to assign a specific ringtone to a contact, open the contact’s record, and access the relevant menu pressing the "Menu" button, then click on "Set ringtone". Favorite Contact "Favorite" Contact is a very convenient function of your SmartVision.
The selected number is shown with a star. In the example below, Pierre Durand is now available in the "Favorite" Contact list within the "Phone" and "Messaging" applications. Please note: the "Favorite" Contact The "Favorites0" list applies to contacts, it is different from application reserved for preferred applications.
Import, Export contacts To avoid problems with specific format of contacts stored on the SIM card, the SIM contacts are not displayed by default in the SmartVision. To view, edit and use contacts from the SIM card, it is necessary to import them previously in the internal memory of SmartVision. 1. To import contacts from the SIM card to the internal memory of the phone, start the application « People » . 2. Press « Menu » key, then « Import/Export ». 3. Select the copy source, that is your SIM card. 4.
5. The list of all contacts stored on the SIM card appears. 6. Select the contacts you want to save in the phone's internal memory and complete the import by selecting "OK". Please note: you can also select all the contacts from the SIM card via the "Menu" key, then "Select All" Delete a Contact From the contacts list, select the contact you want to delete. Once the profile opens, click and "Menu" and select "Delete". Confirm the deletion of this contact with "OK".
SOS Function For your security, SmartVision offers an SOS function which can be used to make location-based emergency calls or send urgent messages to pre-defined contacts (10 au maximum). Warning: KAPSYS shall not be held liable for any damage, either direct or indirect, in the event the SOS feature fails to operate due to a technical problem with the unit or the telephone network being unavailable.
SOS application set up Before using the SOS function, you need to configure the application as follows: 1. From the home screen, click on "Favorites" , then on "SOS" Icon. 2. Read the warning and "Accept" to continue. 3. The SOS function configuration screen appears. The SOS application configuration options are: - "SOS button", enables or disables the SOS button on the back of the handset. - "Play an alarm", activates the emission of a loud warning signal.
Kapten(1) (1) : Not available on SmartVision Lite. Introduction The Kapten application is primarily a navigation system designed for people with visual impairment. It relies on the satellite-positioning system (GPS) to make your journey easier and improve your mobility thanks to its content rich features, such as geo localization, navigation, and map discovery. In addition, Kapten will allow you to save your preferred points of interest in order to guide you there whenever you want.
Starting the navigation application From the home screen, click on "Applications" , then on "Kapten" . The Kapten application is not operational until the GPS feature is activated. If the GPS is not active, you will be requested to activate it upon starting the application. Select the "GPS Settings" button. Check the "GPS satellites" box when you reach GPS settings menu, and press the "Back" button to go back to Kapten application.
Different navigation modes Select the navigation mode you want to use. "Pedestrian Navigation": navigation is adapted for use on foot. "Car Navigation": navigation is adapted for use in a car. "Direct Guidance": used to guide you towards your destination regardless of the actual road network, by giving you distance and direction related information, with the cardinal direction to take and for how long.
Navigate to a "New Address" This setting is used to specify a postal address as the destination. Two options are available to define the postal address as the destination. "Standard" input mode: enables you to enter this address in a single step using the voice recognition feature, in the following sequence: Town/city name, street name, and then street number.
At each stage, you can either use the keypad or speech recognition. Press and hold the voice control key and speak after the signal tone. A list of candidates will be suggested, select one and proceed to the next step. When you have entered the various fields for the destination address, the trip will be calculated and guidance will start instantly. Navigate to "New address by ZIP code" Select the destination town and enter its postal code, street name and number, in sequence.
During navigation Guidance instructions are displayed and announced during your entire trip. From top to bottom of the screen, you will find: - The name of the street you are in (pink zone). - The distance to the next manoeuver (black zone). - The symbol for the next manoeuver (black zone). - The name of the next street (blue zone).
Direct Guidance mode "Direct guidance" mode provides you with real-time information on the distance and direction to your destination point. Such information is calculated as the shortest distance between the two points and does not take into account any road network. This navigation mode is particularly useful to reach a destination point in or off road.
Free navigation In free navigation mode, information on your environment is available in real time. Once this mode is enabled, the Kapten application announces the street you are on and described the next intersection to you. When you get close to an intersection, Kapten describes it by giving you the names of streets in the intersection. After leaving the intersection, Kapten announces the next street you are heading to.
"K-TAG" Menu From the Kapten application, press the "Menu" following options are available: - "Create K-Tag". - "Modify K-Tag". - "Delete K-Tag". button, and click on "K-Tag". The Create a K-Tag To create a K-Tag, select one of the options below: - "Current Position": create a new K-Tag using your current position. - "New address": create a new K-Tag by entering an address. - "Coordinates": create a new K-Tag by specifying the latitude and longitude coordinates. 1.
If you do not wish to assign a voice memo, select "Skip", in this case, the nearest postal address will be used as K-Tag identification. 2. Select the category you wish to assign this K-Tag to: "Contact", "Hotel and restaurant", "Transportation", etc… 3. Lastly, Kapten suggests that you define your K-Tag as a "Favorite". SmartVision & SmartVision LITE – User Guide (Rev. 2.
Modify a K-Tag From the "K-Tag" screen, click on "Modify K-Tag", and choose the category as well as the K-Tag to be edited. When the K-Tag is selected, you may modify its "Category", "Voice memo" or "Favorite" attribute. Select an option and make the required changes by following the steps below: Remove a K-Tag From the "K-Tag" screen, click on "Delete K-Tag", and select the category and the K-Tag to be removed.
"Navigation" specific keywords The following keywords are operational only if the Navigation mode is active. Stop navigation Roadbook Remaining distance Last Instruction Current destination Arrival time Current Navigation mode Switch to Pedestrian mode Switch to Car mode Next Instruction Stops the current navigation session. Activates the road book during navigation. Gives the remaining distance to destination. Repeats the previous navigation instruction. Gives the current destination.
"Pedestrian navigation" settings: - "Automatic instruction repeat": defines the time interval for repeating navigation announcements (None, 1, 3, 5 or 10 minutes). - "Hour indication" enables or disables the hour indication in the instructions related to manoeuvers. "Car navigation" settings: - "Routing parameter": specifies the criteria used for route calculation (Fastest, Shortest). - "Enable highways": specifies route calculation with or without highways.
Assistance This feature enables you to get support from a third party via a private and secured VPN based server, which will have temporary access to your smartphone and assist you in setting up your SmartVision. Request of assistance From the home screen, click on "Favorites" , then on "Assistance" . Enter the third party’s phone number to send him/her a SMS or E-mail address. Click on "Request assistance" to send an assistance request message that contains your handset’s connection information.
"F1" key is assigned to SmartVision "Menu" "F2" key is assigned to SmartVision "Home screen" "F3" key is assigned to SmartVision "Back" Arrow keys SmartVision. The mouse left button button. button. button. are used to navigate through screens and menus on your is used to select an item on the SmartVision’s screen. Click on the "Ends with assistance" option on your smartphone to stop the sharing session at any time.
Calendar The "Calendar" application opens a calendar showing the current week. Press the "Menu" button to access the various options of the "Calendar" menu: - "New event "schedules an appointment by filling out all the fields (event title, location, date, etc.). "Refresh" updates the agenda. "Search" searches an already scheduled event. "Calendars to be displayed" synchronises this calendar with another in a PC for example.
Calculator The "Calculator" application lets you perform the basic operations such as addition, subtraction, multiplication, and division. For more complex operations i.e. sine, cosine, logarithm, etc. calculation, press the "Menu" button to access the menu, and click on "Advanced panel". You also have an option for removing previous calculations. Gallery The Gallery function works like a photo album where photos and videos captured with your SmartVision are stored. Select the "Gallery" application.
Magnifier SmartVision includes a digital magnifier for an enhanced user experience. The digital magnifier lets you enlarge text or entire documents and adapts to your visual acuity using the different settings available for the zoom and colour contrasts. The digital magnifier is accessed by selecting "Favorites" "Magnifier" from the home screen. , then clicking on Pass your SmartVision above the text to be enlarged, move up or down to adjust the sharpness and use number keys"2"and"3"to zoom in and out.
Sound recorder The "Sound Recorder" application is used to record voice memos. Select "Record" to start recording the memo, click on "Pause" to hold and on "Stop" to end the recording. You can listen to a recorded memo by selecting the "Play" option. You may also "Discard" or "Save" it. Lastly, you can play back any of the voice memos recorded, from the home screen after clicking on the "List" option. You can also edit a voice memo from this list by long press the item you want to change.
Browser The "Browser" application is used to access the Internet. Press the "Menu" button to access the internet settings. Through "search" item from the menu you can launch a simple search using the default browser. Please note: You can also search the web using the "Search" application. Web page loading is indicated by a beep. NFC(1) (1) : Not available on SmartVision Lite. NFC (Near Field Communication) technology lets smartphones and other devices to communicate with NFC tags.
OCR(1) (1) : Not available on SmartVision Lite. The OCR function scans a text by means of optical character recognition, and reads it, using text-to-speech function. The conversion rate depends on the text capture quality. The OCR application is equipped with intelligent document recognition and automated data capture system that has the capability to accurately convert an A4 document with text in font size 12 or higher.
"From gallery": Select a document stored in the photo gallery on your SmartVision. Character recognition will start instantly. Once the text is converted, you can browse it using the up ""and down "" keys on the keypad. You can press the "Menu" button to access the OCR menu settings: languages, conversion mode and auto or manual captures.
Legal notice and Warranty 1. PRECAUTIONS FOR USEAND RECOMMENDATIONS - - - Handle your KAPSYS device and accessories with care, do not drop it or knock it Your device is equipped with a touchscreen, please use your fingers only Do not dismantle the product as this will result in the warranty being voided and could cause damage liable to render the product unusable Clean the product using only a soft, slightly damp cloth.
LIMITED WARRANTY Kapsys warrants to the purchaser that the product complies with the description thereof (as shown on www.kapsys.com website) in accordance with the provisions of Articles L.211-1 et seq. of the French Consumer Code. Kapsys warrants to the initial purchaser that the product, from the date of purchase, is free from any defects in workmanship and materials when it is used under normal conditions and according to its intended purpose.
5. ABOUT SPECIFIC ENERGY ABSORPTION RATE Your SmartVision by KAPSYS is a radio transmitter/receiver. It was designed and manufactured to comply with the radiofrequency (RF) exposure thresholds recommended by the European Union. The exposure standards for mobile phones are determined by a measurement unit known as the Specific Absorption Rate or “SAR”. The highest rate according to ICNIRP guidelines for use of the device at the ear is 0.297 W/kg over 10 grams of body tissue.
ABOUT THIS DOCUMENT Information published in this document is liable to change without notice. Kapsys reserves the right to amend the contents of this document with no obligation to notify any person or entity whatsoever thereof. Kapsys cannot be held liable in the event of any technical or publishing errors or omissions contained herein, or in the event of accidental or indirect loss or damage resulting from the product operation or from using this document.
Troubleshooting Prior to contacting the Customer service, please read the recommendations below: - For optimal performance of your device, we recommend that you switch it off from time to time. - It is recommended to fully charge ( ) the battery for improved operation. And carry out the following checks: My mobile phone will not switch on / I get a black screen: - Press the "On Off" key until the screen comes on. - Check the battery charge level.
SIM card error / No phone feature can be accessed: - Check if the SIM card has been correctly inserted. - Check if the chip on your SIM card is not damaged or scratched. Unable to make outgoing calls: - Make sure you have dialled a valid number and pressed the "OK" key. - For international calls, check the country and area codes. - Make sure your mobile phone is connected to a network, and that the network is not overloaded or unavailable.
Technical Specifications - Operating System : Android 4.0 - Design : Size : 130 x 60 x13 mm Weight : 140g Touchscreen : capacitive multitouch, IPS QVGA, 3.5″ with automatic backlight management - Hardware : Sim card format : Standard (2FF) Connectors: Micro USB OTG 2.0, jack audio 3.5mm Cellular connectivity : o HSUPA / HSDPA (3G+) o UMTS (3G) o GSM 850 / 900 / 1800 / 1900 Wireless connectivity : o Bluetooth 3.0 o WLAN IEEE 802.11 a/b/g/n 2.
