Quick Start Guide
Sending a message
The SOS function
For your safety, SmartVision includes an SOS
function allowing you to initiate automatically
calls and/or send location-based emergency
messages to pre-dened contacts (within
the limit of 10 contacts) when SOS button is
activated.
During an emergency case,
activate this function using
the SOS button on the back
of the phone, by pressing
and sliding the button
downwards.
Before using the SOS function, you need to
congure the application.
Set Application
From the Home screen, select , then
Then set the following options:
Other applications
Alarm : set your alarms
Assistance : allows a third person to take
the control of your phone
Browser : browse the internet
Calculator
Calendar : schedule your appointments
Camera : take pictures or record videos
FM Radio: listen to the radio
Galery : sort and view your images, photos
and videos
Kapten* : move freely with this embedded
GPS navigator
Magnier : increase the size of a picture or
a text
Music : listen to music stored on your
phone
NFC* : programme and read your NFC
tags
(2)
OCR* : scan and vocalize your documents
Creating a contact
1. From the Home screen, select rst
then
to start the People application.
2. Select Add contact eld.
The New Contact screen
appears.
3. Enter the elds one by one
(First name, Last name,
Phone number etc...).
Press OK at the bottom the
screen to create and save
the contact.
4. You can also attach a picture to this contact.
SmartVision suggests you either take a
picture or choose one from the Gallery .
Make a call
In Keypad mode
1. Tap the
icon and
follow the on-screen
instructions.
4. Select to display all the call history.
2. Select to acces
and call one of your
contacts stored in
your contact list.
3. Select to access
and call one of your
contact set as a
«Favorite»
In Voice mode
From the Home screen, give a short
press on the voice command button.
After the beep, enter keyword «Call»
followed by the name of the person
you want to call. Please note that the
contact name should be part of your
contact list. Follow the instructions to
conrm the call.
Examples of voice commands:
1. «Call Paul Johnson»
3. «Call Paul Johnson Mobile» (if you have
saved more than one number for this contact)
Answering a call
When you receive a call, the screen displays the
number, or the name of the caller saved in your
contact list.
You can also answer a call by pressing green
colored Accept or decide to reject the call by
pressing red colored Refuse button.
2. Enter receipient’s number
or select receipient from
People or Favorites.
SOS button : allows enable or disable the button
on the back of the SmartVision.
Play an alarm: sounds a warning signal using
loudspeaker.
Set phone numbers : allow you to set up the
destination numbers that you want to call or
send a message when SOS button is activated.
Phone call : allows telephone calls to destination
numbers when SOS button is activated.
Send message : allows sending messages
to destination numbers when SOS button is
activated.
Send location : allows SmartVision to report your
geographical location in emergency messages.
Please note that if this information cannot be
guaranteed. .
Message text : allows personalizing the contents
of the emergency message to send.
1. Select the New
message eld to
create a new SMS
or MMS.
-11- -12- -13- -14-
-15- -16- -17- -18- -19-
-10-
2. Enter the number
you want to call
on the keypad and
press the OK button
to conrm and
make the call.
In Touchscreen mode
1. From the Home
screen, use the
physical keys ▲▼
until the application
, Press on OK,
and the phone
application starts.
In Keypad mode
From the Home screen, use the ▲ ▼ untill
application , and press OK. The Messagesing
application starts.
1. Use the keys to select the New message
button and press OK.
2. Enter the receipient’s number, then select
Write a message, and click OK to validate.
3. Enter the message using the alphanumeric
keypad. Once the message has been written,
select Send, and then conrm by pressing
OK.
In Touchscreen mode
From the Home screen, select the . The
Messagesing application starts.
3. Select Write message,
then write your message
using virtual keypad, and
then press Send to send
the message.
In Voice mode
From the Home screen, short press
on the voice command button. After a
beep, pronounce «Send a message to»
followed by the name of the person you
want to send a message. Please note
that the contact name should be part of
your contact list. Follow the instructions
to write the message and send it.
Example of voice command:
«Send a message to Paul Johnson».
Please refer to the SmartVision User Manual
for a description of the other applications and
functions.
About this guide
The information published in this document may change
without notice. Kapsys reserves the right to amend the
contents of this document with no obligation to notify any
person or entity whatsoever that it has done so. Kapsys
cannot be held liable in the event of any technical or
publishing errors or omissions contained herein. Kapsys
makes every effort to continuously improve the quality
and functions of its products and Kapsys accordingly
suggests that you visit its website (www.kapsys.com)
for the latest updates to documentation regarding the
use and operation of its products.
if you have entered a wrong number, press
the C key to delete the last character.
You can also initiate a call directly from your
Contacts list, Favourite contacts or Call
history simply by prononcing the contact
name.
To enter digits, tap the ?123 key, and to enter
letters, tap the ABC key.
You can create your contacts using any of
the three modes, i.e. keypad, touchscreen
and voice
* Application or accessory not available on
created by Jecy Traductions for Kapsys
Recorder : record and play back your voice
memos
Search : nd something on your phone
Video Player : watch your recorded videos
on your phone
In keypad mode, use the OK
or C keys to answer or reject
a call respectively.