User Manual 4G PHONE Model: MiniVision2
Getting Started Inserting a SIM card Remove the battery cover (opening in the bottom left-hand corner) Slide the SIM card into the SIM card holder with gold contacts facing down. Slide your MicroSD card into the card holder with gold contacts facing down Inserting and battery Insert the battery, making sure that battery contacts touch the gold contacts, then place the battery cover and press down until it clicks into place.
Using the Phone In standby mode the phone is one, but is not running any applications (call, SMS message, etc.). Using the menu Press Left menu key to open the menu. Press Up/Down arrow keys to flick through the menu items. Press Left menu key to open a menu item. To return to standby mode, press Red button or close the phone. Dual-function keys Some keys have additional functions if they are pressed and held down for a few seconds. Number 1 key: Listen to mailbox.
the phone is on. Saving Contacts to Phonebook 1. Press Options add contact OK 2. To input contact’s name, use down arrow key to move the highlight to Name, then press Edit. Press OK when finish. 3. To input phone number, press the down arrow button to move the highlight to Mobile or Home number, press edit, press OK when finish. Please note: You can assign specific ringtone to each contact.
Camera Camera (take photos) Note: To get sharp photos, wipe the lens clean with a dry cloth. 1. Press shortcut camera button. Alternatively press Menu->Multimedia->Camera. 2. Press Camera button to take photo. 3. After the photo was taken, press Options to Delete, Set as wallpaper or go to Image viewer for more options. Note: To store more pictures you need a micro SD memory card up to 16 GB. (Not included in the accessories) Camera adjustiment 1. Use Up/down navigation arrow keys to zoom in and out. 2.
EV/light sensitivity. Note: Zoom may reduce picture quality. Camera settings 1. In camera, press Options, select Settings then press OK 2.
Messages You can send and receive messages. however, it may depend on your network operator. Please contact your network operator for more information. Write messages 1. 2.
special character Press the # Button to switch between small, capitalization and word recognition. The icon display on the top right of the display. Press the right and left key to change the place Press the right menu button to delete. Press and hold right menu button to delete all letters.
first letter cap then small letter abc: Corresponing keys once per letter, all small letter ABC: Corresponing keys once per letter, all cap letter 123: All number input After you the message is complete, press Options and select Send The phone has the possibility that Send to one or multiple contacts. Other options: You can see limit of the number of written letters on the right top of the screen.
read messages. Depending on the mode, the phone vibrates or rings and the Green LED will flash if you get a new messages in standby mode, you can also see this icon on the screen. Press the Option for following functions: Delete, Reply, Call sender, Forward, Advanced and Save. Note: If the message memory is full, flashes in standby mode, please delete some messages to reveive new ones. Drafts In Draft you will see your saved SMS messages. Outbox In Outbox store unsent messages.
In this menu you can see already sent messages. The following functions are available: View, Delete, Delete all, Forward, Mark and Sort. Calls history In this menu option, Your phone stores list for Missed calls, dialed calls and received calls. Note: The latest entries are on the top of the list.
calls, Dialled calls, and Entire call history. Organizer Alarm clock Up to 3 alarm clocks can be made. To set the alarm: 1. Select an alarm and press Edit. You can set the alarm with follow options: Status on/off (Press Camera button to confirm), Time, Repeat as well as the Alarm tone. 2. After the alarm clock is set, press button Save. 3. When the alarm sounds, press Stop or Snooze button to stop the alarm.
the alarm again in 5 minutes. Calculator With this function, you can use your mobile phone as a calculator. The Calculator controls the basic arithmetic functions. Features: Type the number (1 to 0). Press # for a decimal point. Use the arrow keys for: +, Use the M1 M2 keys for: x, ÷ Press Camera button for: = Press right menu button for delete Calendar 1.
Keys in the calendar navigate the date. By pressing the left menu button (Options), you can Add new schedule, View schedule, check all schedules, Clear today’s schedule and Clear all Schedules. 1. Setting up the SOS function SOS How does SOS function work? Caution: When an SOS call is activated the phone is pre-set to handfree/speakerphone mode.
speakerphone mode is in use, because the volume maybe extremely loud. 1. Press the Left Menu key (on keypad) 2. Scroll to and select Tools 3. Go through to Number Setting-Emergency Number—Save 4. Go through Emergency SMS-write message Please note: SOS message will only be sent to mobile phone numbers (in SOS list). SOS calls need to be accepted by the receiver within a specific timeframe. If you are programming a phone number that has an automatic answering feature please test before use.
changed to meeting (Vibrate only) mode by pressing and holding the pound (#) key for three seconds. Repeat the step will switch the phone back to normal mode. Setting 1 Sim card 2 Wi-fi Press Wifi—select on -Optionsearch the Net work—write the code 3 Bluetooth Active Bluetooth 1.
2. Select 1st option Bluetooth then press ON Important note: When you are not using Bluetooth connectivity, select Bluetooth off. Do not pair with an unknow device. 4, Audio profiles Profiles (sound) Press Menu->Settings->Profiles then OK Important note: To activate the speaking keypad feature, please select Human voice profile, press Options and Activate. Display the profile mode list including: General, silent, meeting, Human voice and outdoor.
profiles Settings: Adjust ringer, keypad sounds, and other desired sounds etc. 5 Display U can choose the light of t he phone here,also the font size 6 7 Voice abroadcast Data usage U can find the memory of the phone here 8 Personal 8.
8.2 security 8.3 Date & time 8.4 Language & input 8.5 Scheduled on/off 9 system 9.1 Storage 9.2 Battery 9.3 Mouse control 9.
9.5 Reset 9.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Specific Absorption Rate (SAR) information: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.
