Instruction Manual

Support tab is used to contact Kapsys on-line support.
Paragraph 3: Using kapmanager
This paragraph describes how to synchronise your kapten plus with the Kapsys site and
configure certain specific settings on your kapten plus.
Note. To access the complete help content on kapmanager, click on help in the menu bar when
you have installed and launched kapmanager, then click on Help content.
Synchronising kapten plus
Once it has been installed, the kapmanager application allows you to synchronise your kapten
plus with the website www.kapsys.com.
Synchronising your kapten plus with the website via kapmanager means going through the
following procedure:
1: Connect your switched on kapten plus device to your computer using the USB cable
provided in your pack. The kapten plus switch set to USB mode.
Warning! When the kapten plus is on USB mode, its functions are not available;
2: install the kapmanager application on your computer, then launch the application;
3: As soon as the peripheral device has been recognised, click the mykapsys tab under
kapmanager.
Click the "synchronising to mykapsys" button located at the bottom left of the display to start
synchronisation. If you wish to stop the synchronisation, click on the same button.
Note: We recommend that you connect your kapten plus to your computer as frequently as
possible. By connecting your kapten plus to your computer, not only do you charge the
battery, but you will also update the block calendars which enhance GPS localisation, and the
speed camera database.
Configurating kapten plus
The kapmanager application allows you to configure different settings on your device.
After launching Kapmanager, select the kapten tab located on the top left tab bar. Click on
Configure. A certain number of parameters and options for settings are displayed.
In the Navigation section.
Default navigation mode option: allows defining a default navigation mode such as:
Pedestrian, bike, motorbike, car or none
Calculation of itinerary option: optimises your itinerary in terms of time (the quickest route)
or distance (the shortest distance).
Restrictions option: sets restrictions to be applied to your trip (avoid motorways, or avoid
tolls).
Radars option: activates / deactivates the speed camera warning
Activate navigation paths Option: activates/deactivates the record of your navigation paths in
kapten plus.
In the Parameters section.
Beep sounds Option: Sets activation/deactivation of confirmation beep for your kapten plus.
Length unit Option: to define units of length option (metric or imperial units).
To re-starting kapten plus