User's Manual

Page 90 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
14.9.2 Password for Operation
Figure 53 TestGen2: password for operation
ᬅ
Password sets the password for the tag operation in the hexadecimal format
14.9.3 Write EPC
In this tab, it is possible to change the EPC of the tag.
Figure 54 TestGen2: write EPC
ᬅ
New EPC enters an EPC in the hexadecimal format
Make sure to comply with the maximum EPC length supported by the
tag. If the maximum length is exceeded, the tag will return an error.
ᬆ
Auto
increment
activates or deactivates increasing the EPC by one with each successful writing
process
ᬇ
Write EPC
to selected
tag
writes the EPC on the selected tag
ᬈ
Write EPC
to tag in
field
writes the EPC entered in 1 to a single tag
Ź When using this command, make sure there is only one tag in the field. Otherwise,
an error message is displayed in the status field.