User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 79 of 105
Confidential
14.6.3 Action List and Assign Input to Action List
To automate the processes, it is possible to store command sequences on the reader in the form of action
lists. These are triggered by a change of edge at the selected input.
Fig. 43: GPIO: Action List and Assign Input to Action List
14.6.3.1 Action List
Each input channel has two configuration parameters available:
ᬅ
Action list selects an action list (0–127) from the drop-down menu to save the action in
ᬆ
Action
selects an action from the drop-down menu, e.g. Activate buzzer (500 ms),
SyncGetEPCs, ASyncGetEPCs, ASyncStopCommand; see also 14.6.3.3 Adding
Actions to the Program
Ź To see the commands contained in the current action list, type in
%userprofile%\Documents\Kapsch TrafficCom AG\ReaderStart v3 into the Windows
search field.
ᬇ
Add action
adds action; the action is shown under Details (ᬉ)
ᬈ
Clear
action list
deletes actions; no actions are seen under Details (ᬉ)
Tipp
To remove only one action from the list:
1. Select an action from the list shown under Details.
2. Right-click on the selected action.
ۆ The pop-up message Remove entry appears.
3. Click on Remove entry to delete the action.
ۆ The action is deleted from the list.
_
ᬉ
Details shows added actions in the chronological order as they have been selected
ᬊ
Get action
list
shows the current action list
ᬋ
Set action
list
saves the set action list (flashes blue after having added an action to the Details (ᬉ)