User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 75 of 105
Confidential
14.4.1 Selecting Functions
Ź Click on the arrow (ᬇ in
Figure 37
) to select between the following functions:
Figure 38 LED: functions
ᬅ
Off deactivates the LED
ᬆ
On activates the LED (always on)
ᬇ
1 Hz – 8 Hz
frequency
LED flashes at a frequency of 1/2/4/8 Hz
ᬈ
RF on
LED lights up for Turn-off time milliseconds if a radio frequency is present at the
antenna First antenna to Last antenna has been successful
ᬉ
Antenna error
LED lights up for Turn-off time milliseconds if an error occurs at the antenna First
antenna to Last antenna
ᬊ
Tag found
LED lights up for Turn-off time milliseconds as soon as a tag has been found at
the antenna First antenna to Last antenna
ᬋ
Tag operation
success
LED lights up for Turn-off time milliseconds if a tag operation at the antenna First
antenna to Last antenna has been successful
ᬌ
Protocol access enables the protocol to switch the LED on and off
ᬍ
KRAI status shows whether a @KRAI antenna is connected to the reader
ᬎ
Wi-Fi status shows the Wi-Fi status
• flashing: trying to connect
• permanently lit: connected
• off: Wi-Fi disabled