User's Manual

Page 74 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
LED
Not all readers support the functionality with 12 LEDs; all readers have at least 4 LEDs.
Please check the reader data sheet for information.
In this tab, it is possible to assign various functions to the 12 LED channels. It is possible to activate other
parameters, depending on the selected function.
Tipp
As supplied to customer, the first 4 LEDs are allocated to antennas 1–4, LED 5 is allocated
to GSM, LED 6 to KRAI, LED 11 and LED 12 to Bluetooth and Wi-Fi, respectively. It is
possible to customize this allocation.
Figure 37 LED
ᬅ
Live shows the changed LED colour in real time
ᬆ
shows RGB values
ᬇ
Function selects between the functions described in 14.4.1 Selecting Functions
ᬈ
First antenna the first antenna for the selected function
ᬉ
Last antenna the last antenna for the selected function
ᬊ
Turn-off time sets the time for how long LED is on for the selected function
ᬋ
Brightness
(live)
changes the LED brightness for all active LEDs (between 0 (auto brightness
determined by the integrated light sensor) and 100)
Ź Move the brightness position along the bar to change the brightness of the LED.
ۆ The number at ᬌ changes.
ᬌ
changes the LED brightness (between 0 and 100)
Ź Click + or – to change the brightness of the LED.
ᬍ
Get shows the current settings for all LEDs
ᬎ
Set sets the new settings for all LEDs for which the settings have been altered