User's Manual

Page 66 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
Application
The Application tab enables quick and easy configuration of the RFID Reader SRU-8X1X for a selected
application
Figure 30 Application Tab
ᬅ
Application
selects between the available applications represented visually by means of labelled
pictograms
Ź Click on a pictogram to select the application.
ۆ The selected pictogram is marked in a darker color, in Figure 30 it is Conveyor > 2
m/s.
ᬆ
Settings
changes setting of the selected application
ס number of the expected tags selects the antenna to be used
ע Ź Check Ports 1-4 to select the antenna port. It is possible to select one,
several or all ports.
ף selects the parameter set in which the configuration is saved
פSets the values for max. reading speed or max. reading reliability
Ź Click Optimized for reading speed or Optimized for reading reliability.
ۆ The values in Settings of selected application (ᬇ in Figure 30) change.
When the max. read frequency is set (Optimized for reading speed is activated), the
number of readings is maximized. In this case, the same tag can be read several
times, because all tags will be reset in the inventory so that they will respond again.
Because of reading the same tag multiple times, in a scenario of moving tags it could
happen that not all the tags crossing the antenna field are read. The frequency of
detection of the same tag is increased. In some cases, the time allowed for detecting
the tags may be insufficient, so that some transponders are not detected.
When the max. read reliability is set (Optimized for reading reliability is activated),
tags that have already been read are not read again in the next inventory, provided
they are still being supplied with power. This means that only the tags which have not
yet been registered are detected. This way, the probability that all tags are read is
increased.
