User's Manual

Page 62 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
If the interface has been configured incorrectly, it is not possible to establish a connection to
the reader.
Ź Note the following default configuration settings:
Name UHF-RFID-Dev
IP address 192.168.0.1
Subnet mask 255.255.255.0
Kee
p
-
alive tim
e
2000 ms
DHCP deactivated
14.1.2.4 Wi-Fi
Figure 27 Communication configuration Linux model: Wi-Fi
ᬅ
Refresh reads the current settings of the communication configuration Linux module
ᬆ
IP4 see Figure 26
ᬇ
IP6 enters the second IPv6 address (the first IPv6 address is the link local address)
ᬈ
Status shows the status of the Wi-Fi connection
ᬉ
IP address shows the current IP address
ᬊ
SSID shows the name of the access point
ᬋ
MAC shows the MAC address of the access point
ᬌ
Frequency shows the frequency of the Wi-Fi connection
ᬍ
IsOnline shows whether the Wi-Fi module is online
ᬎ
Get status reads the current status of the Wi-Fi module
ᬏ
Go online establishes the Wi-Fi connection
ᬐ
Go offline interrupts the Wi-Fi connection
ᬑ
Go online at start activates or deactivates the Wi-Fi connection as soon as the reader starts
ᬒ
shows the list of the configured access points with SSID and password; the
access points are shown in the priority order