User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 61 of 105
Confidential
14.1.2.3 Ethernet
Figure 26 Communication configuration Linux model: Ethernet
ᬅ
Refresh
reads the current settings of the communication configuration Linux module
ᬆ
IP address
manually issues the address
Tipp
It is only possible to use this parameter if the DHCP (ᬊ) is deactivated.
ᬇ
Subnet
mask
manually issues a network mask
Tipp
It is only possible to use this parameter if the DHCP (ᬊ) is deactivated.
ᬈ
Gateway
enters the gateway
ᬉ
DHCP
activates/disactivates the automatic issuing of an IP address by a DHCP server; if the
network has a configured DNS server, it is also possible to use the host name of the
reader.
ᬊ
IPv6
enters the second IPv6 address (the first IPv6 address is the link local address)
ᬋ
Status
shows the current reader IP address (eth0)
ᬌ
Get
gets the current status

Set
saves changes
If the data relevant to the current connection (e.g. IP address) are changed, it may cause an
error and the connection is lost.