User's Manual

Page 50 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
13.4.1.10 Changing NTP Settings
To simplify the time setting, it is possible to enter a preferred NTP server. This way, in a defined interval, the
reader retrieves the information from the NTP server and gets the time from the network, thus setting the
internal time settings of the reader.
Ź Click NTP settings (ᬆ).
ۆ The following dialogue opens
ᬅ
NTP server enters an NTP server address, e.g.
0.pool.ntp.org
ᬆ
Interval
sets the interval in the range 0–4204967295 s to synchronize the time with
the NTP server
ᬇ
Time shows the current date and time of the reader
ᬈ
Status shows the status of the last performed operation in the NTP settings dialogue
ᬉ
Get NTP server reads the NTP server settings currently set in the system
ᬊ
Set NTP server
sets the NTP server selected at ᬅ
ᬋ
Get interval reads the interval currently set in the system
ᬌ
Set interval
sets the interval selected at ᬆ
ᬍ
Get time gets the current time of the reader
ᬎ
Set time via NTP manually synchronizes the time with the NTP server