User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 47 of 105
Confidential
13.4.1.7 Changing Date and Time Settings
The reader has an integral clock which can deliver the time stamp for a tag operation. It is possible to set the
clock using Date and time settings under Options in the menu bar. When this menu item is opened, it
automatically reads the current date and time from the reader and compares this with the date and time from
the host computer. The date and time of the host computer can now be loaded to the reader by pressing the
Set system date and time on Reader button.
1. Click Date and time settings.
ۆA dialogue appears. It automatically reads the current date and time from the reader (ᬇand ᬈ) and
compares them with the date and time from the host computer (ᬅ).
ᬅ
Date and time of the
ReaderStart SW
shows the date and time of the ReaderStart software; cannot be changed
ᬆ
Set system date and
time on reader
loads the system date and time shown in ᬅ onto the reader
ᬇ
Current date of the
reader
shows the current date of the reader
1. To change the reader's date, either type the new date into the line or
click on the calendar symbol in the line and select the date.
2. Click Set adjusted date and time on reader.
ᬈ
Current time of the
reader
shows the current date of the reader
1. To change the reader's time, either type the new time into the line or
click on the clock symbol in the line and select the time.
2. Click Set adjusted date and time on reader.
ᬉ
Get reader date and
tim
e
reads the current date and time from the reader and displays them in ᬇ and
ᬈ
ᬊ
Set adjusted date
and time on reader
sets the adjusted date and time on reader; see ᬇ and ᬈ
ᬋ
Time zone selection
selects the time zone
1. Click on the drop-down menu symbol (ᬋ).
2. Select the continent and the city.
ۆ The time zone is displayed at (ᬌ).
ᬌ
Get time zone reads the time zone currently set in the system
ᬍ
Set time zone
sets the time zone selected at ᬋ