User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 17 of 105
Confidential
8 7KH5HDGHU
Functional Specification
The Kapsch RFID (Radio Frequency Identification) reader SRU-8X1X series is capable to read active and
passive RFID tags in the frequency range from 865 to 868 MHz for Europe and 902 to 928 MHz for the
American market. Based on the latest RFID standards, such as EPC Gen2v2/ISO 18000-63, the Kapsch
SRU-8X1X series support all market leading transponder chip features for security, authentication and
encoding. As supplied, the unit can read and write tags in accordance with the EPC Gen2v2 standard.
It is possible to load additional protocols using software updates.
The device has a maximum of four external antenna ports for connection of the transmission/reception
antennas for communication with RFID tags.
For integration into a variety of infrastructures, the device has different communication interfaces, depending
on the variant. The power supply is provided either by a 4-pin M12 panel connector in A coding or by PoE+
according to 802.3at (10–57)
1)
.
The Kapsch UHF RFID reader system SRU-8X1X is characterized by great flexibility in regard to RFID
applications. One reason for it is the wide variety of reading devices compatible to each other, which allows
to select a reader from the Kapsch product portfolio ideally suited for the respective application. Another
reason for this flexibility is the wide range of parameters for configuring the reader firmware.
Features
х basic computing module
х dual-core embedded PC
х 2 Ethernet ports, 1 Ethernet port (SRU-8211)
х GPIO
х PoE+
х LED visualization
х Wi-Fi (in preparation)
х Bluetooth (in preparation)
х 2G/3G (in preparation)
Scope of Delivery
х SRU-8X1X reader
1) Internal supply of GPIO VCC pin is not possible with PoE+