User Manual

Kapsch TrafficCom AG
Page 44 of 58 Installation Manual | SRU-8100 RFID Reader 18000-63
Doc No. 47000001169 | Version 01 | 2014-11-03 | released
47000001169-Ins-01
When all necessary data such as password, memory bank and memory address have been input a
decision can be made whether to specify the data to be written or to generate them as random values. If
specified data should be written, optionally a data mask can be specified. When using random data, the
amount of them should be stated in words (16-bit).
Note: Right-clicking on the Data to write field opens a context menu, which allows the selected EPC to be
copied into this field.
Note: Right-clicking on the Data mask field allows this to be filled optionally with 0 or F according to the
amount of the data to be written.
Clicking on Start starts the execution of the previously specified number of write attempts. The error-free
completion of all write attempts is once again indicated by the button glowing green and by a message in the
status window. If any necessary data are lacking, the button briefly glows red and the field lacking the data
glows red somewhat longer. The associated error message appears in the status window.
The Writing successful and Writing failed fields indicate how often the write attempt succeeded or failed
Hovering the mouse over the number of failed write attempts (provided indeed any failures did occur), calls
up a window with detailed information.
Asynchronous writing:
In this type of writing the data is written to every EPC that shows up in the antenna field. When all necessary
data (password, memory bank, memory address and data to write) have been entered, clicking on Start
starts the asynchronous write process. Successful and failed write attempts are shown in the respective
fields. Hovering the mouse over the number of failed write attempts (provided indeed any failures did occur),
calls up a window with detailed information.
Note: Right-clicking on the Data mask field allows this to be filled optionally with 0 or F according to the
amount of the data to be written.