User Manual

Kapsch TrafficCom AG
Installation Manual | SRU-8100 RFID Reader 18000-63
Doc No. 47000001169 | Version 01 | 2014-11-03 | released
Page 41 of 58
Figure 21 Basic read functions tab
The entries show the following information:
No. Parameter Function
1 Length indicates the length in bits of the EPC, valid lengths 0-496 bit
2 EPC Electronic Product Code (EPC) of the tag in hexadecimal representation
3 Port Tag was read over this antenna port - valid values 1-4
4 RSSI Signal strength of the tag response, valid values 0-255
5 Reads Shows how many times this tag has been read successfully
6 Cycles Indicates how often a search/lookup operation was started
7 First read Is the timestamp of the first reading of the tag
8 Last read Is the timestamp of the last reading of the tag
The appearance and disappearance of the tag is shown in color in the field for better visual effect.
When a tag appears in the field, the row is represented by the green tag information, when it disappears the
row is red.
The tag reading options are listed on the right side of the window. Two modes are available: „synchronous“
and „asynchronous“ (see below for details).
On option is sort for unique tags. This is especially useful in multi-antenna applications and counts
distinguishable tags in the communication field.