User Manual

Kapsch TrafficCom AG
Installation Manual | SRU-8100 RFID Reader 18000-63
Doc No. 47000001169 | Version 01 | 2014-11-03 | released
Page 39 of 58
Figure 20 Application tab
When the button for the desired application is clicked, it glows green continuously. In addition the
designation, the properties and the settings of the selected application are displayed in the respective fields.
The following applications are available for selection in version 2.00 and later of the ReaderStart v2:
 Conveyor belt > 2 m/s
○ Application for detecting individual tags in the antenna field on a conveyor belt moving at more than
2 m/s
○ the distance between the tags and the antenna is only a few centimeters
 Conveyor belt ≤ 2 m/s
○ Application for detecting and writing on individual tags in the antenna field on a conveyor belt
moving
○ at less than or equal to 2 m/s
○ the distance between the tags and the antenna is only a few centimeters
 Gate
○ Application for detecting multiple tags in the antenna field as they pass through a gate
 Vehicle identification (barrier)
○ Application for detecting and writing on individual tags in the antenna field, which are not moving
○ the distance between the tags and the antenna should be less than a few meters
 Vehicle identification