User Manual

Kapsch TrafficCom AG
Installation Manual | SRU-8100 RFID Reader 18000-63
Doc No. 47000001169 | Version 01 | 2014-11-03 | released
Page 29 of 58
Reloading the settings starts with the selection of the parameter file. In the opening input mask all available
parameter sets are displayed. The assignment of them to the individual save locations can be reassigned
here. For this purpose the desired parameter set on the reader can be selected in the drop-down menu.
Selection of the item None means this parameter set is not loaded into the reader. In the default setting a 1:1
assignment applies. Choosing Assign parameter sets 1:1 resets all the changes in the assignment to
default. Choosing Delete Assignment deletes all assignments of the saved parameter sets to those in the
reader. In the drop-down menu this is indicated by None.
Figure 9 Loading a configuration from the file
7.4.2.2 Options
The first four entries in this menu include changing the language, selection of the warnings that are
displayed, resetting the layout and deletion of the status messages in the status field. The language used in
the program set to the desired language by clicking on Language Selection in the menu item. The currently
selected language is shown by a check; if a computer restart is necessary in order to load the change, the
program will indicate this.