User's Manual

Page 14 of 19 User Manual | Onboard Unit Programming Station OPS-9955
1000005508-Bed-02
 The OPS is ready for personalization, if the orange LED lights
continuously. (If not see section Fault Diagnosis, page 16).
Note: The lid of the OPS must be closed.
 Open the lid by pushing the lid slightly at the grip in front of the OPS.
 Place a packed or unpacked OBU as shown in Figures 7 – 10 in the
OPS.
4. Start-up
5. OBU Positioning
Figure 6
Correct positions of packed OBUs
Figure 7
Incorrect positions of packed
OBUs
Figure 8
Correct positions of unpacked
OBUs