User's Manual

Installation and Operation Page 13 of 19
1000005508-Bed-02
1
2
3
No.
Name
Description
1
Power LED (green)
After connecting the power supply of the
OPS to AC power, the Power LED is
illuminated GREEN continuously.
2
Programming LED
(orange)
After the OPS is initialized and the lid is
closed the Programming LED is
illuminated continuously ORANGE. After
successful personalization of the OBU the
Programming LED flashes until the lid is
opened.
3
Error LED (red)
In case of an error the Error LED flashes
RED.
By default the OPS gets its network configuration via DHCP.
Note: A DHCP Server must be installed on the Point-of-Sale Terminal
before connecting the OPS.
Figure 4
HMI Interface on the OPS
Table 3
HMI Interface
Figure 5
OPS connecting scheme
3. Network configuration