User's Manual

Page 12 of 19 User Manual | Onboard Unit Programming Station OPS-9955
1000005508-Bed-02
Installation and Operation
Connectors
Status LEDs
Recessed grip
 Place the OPS on a desk or other flat surface in a horizontal position.
 Connect the OPS to the Point-of-Sale by using a RJ45 cable.
 Connect the external power supply to the OPS.
 Connect the external power supply to the 110VAC - 230VAC outlet.
 The green Power LED is illuminated continuously.
1
3
2
No.
Name
Description
1
RJ45 Ethernet Connector
(female)
RJ45 connector to connect the Ethernet
cable to the Point-of-Sale Terminal
2
RS232 Connector (male)
D-Sub 9-pin RS232 connector for service
purposes only.
3
Power Supply Connector
(male)
Power Supply connector 12 – 24VDC for
connecting the external Power supply.
Figure 2
Onboard Unit Programming
Station OPS
1. Mounting
2. Connecting
Figure 3
Connectors on the OPS
Table 2
Connectors on the OPS