User's Manual

Page 10 of 19 User Manual | Onboard Unit Programming Station OPS-9955
1000005508-Bed-02
System Overview
A typical point-of-sale installation consists of the OPS-9955, a Point-of-Sale
Terminal and auxiliary equipment which depends on the needs of the
operator. The Point-of-Sale Terminal is a PC which is connected to a
network infrastructure in most system configurations.
The OPS-9955 is a communications device for data exchange between the
Point-of-Sale Terminal and the OBU according to the WAVE standards.
The OPS is designed for office use. It will be powered by an external power
supply, which is connected to AC power. Ethernet is used for data exchange
between OPS-9955 and the Point-of-Sale Terminal.
The software package delivered by KAPSCH includes driver software for the
OPS-9955 to integrate the device with a Point-of-Sale Terminal. See
Programmer’s Manual for details.
Note: The OPS-9955 cannot be used without installing the KAPSCH
software package on the user terminal.
 Generic Programming Interface for Integrators
 Intuitive Operation
 Personalization of Packed and Unpacked OBUs without the need of
exact positioning
 Maximum size of programmable OBUs up to 40x155x110mm
(1.5in x 6.1in x 4.3in) (HxLxW)
Hardware
Software
Figure 1
System overview
OPS features