Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 97 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX

05/25/2022 11:18

Kapsch TrafficCom

The Ethernet Network

These are general instructions for using Ethernet Switch Modules (ESMs) to create an Inter-Reader

(IR) Ethernet network or a Lane Controller (LC) Ethernet network.

Installing an Ethernet network

Prerequisites: ESMs mounted according to the manufacturer’s instructions.

1. Use CAT 6 Ethernet cables to connect the components in the Ethernet network together as shown in the

examples in Figure 5-10. Consult the ESM manufacturer’s instructions for more details.

Figure 5-11: Schematic of a three-Reader IR network