Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 82 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX

05/25/2022 11:18

Kapsch TrafficCom

5. INSTALLATION

Introduction

The Reader is shipped with necessary mating connectors for Sync, Power, and Ethernet connections.

The Antennas are supplied separate from the Reader.

After the equipment is installed, the Reader must be configured via the WEB browser interface. After

configuration is complete, the Reader configuration needs saving (see Saving the Reader

configuration, page 127) for future reference.

The toll agency and/or system integrator must select the configuration and setup that is suitable for

the application and the desired system performance.

CAUTION:

Improper modification of configuration parameters may adversely

affect system operation. The default values may not be appropriate

for the specific application. It is the system integrator’s responsibility

to tailor the configuration parameters to the specific operating

environment.