Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 79 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX

05/25/2022 11:18

Kapsch TrafficCom

Table 4-3: List of Fields in a Transaction Log Report

Field

Description

IREAD

Optional initial read report when transponder first enters capture zone. Informational report

VOTE

Transaction report at voting time

POST

Optional post-capture zone report if lane assignment or programming status has changed. Informational

report

Port number. Indicates the assigned Port (1-8). Port 1 corresponds to the leftmost RF module in the RF rack.

Transaction status.

Pgm indicates successful transponder programming.

PU indicates transponder programming status is Unknown (tag left zone before verify could complete).

PF indicates transponder was not programmed successfully.

Read indicates the Reader is in read only mode.

CrossR indicates an informational report (not a transaction).

Txn

Transaction number. Note that transaction numbers may appear to skip when using 2 or more Readers with

Ethernet connection between them.