Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 64 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Result: The following screen is shown as an example.

3. Under the TDM Channel Firing Sequence panel enable slots 1 to 4 sequentially for the 4 Ports.

Result: The following screen is shown as an example.

Example 2: TDM, 6C (6CTOC compliant), and 6B, two (2) Lane ORT with one Shoulder (four (4) Ports) with

four (4) Port scan) and synchronization between readers

Note 1: To fully use the sequence over the air it is also necessary to set Ports 1-5 to Active or

Guard in the Channel page, and to set appropriate attenuations for each Port