Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 60 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

2. Click the dropdown under icon.

Result: The following screen is shown as an example.

3. Select the required protocol

4. Repeat this sequentially for each Seq# (frame) in order to build up a sequence.

Note 1: To build a frame sequence, work from left to right starting in the first frame. To change or

delete frames from a sequence, you must always start with the last frame and work

towards the left.

Note 2: The maximum number of actively transmitting frames (Seq#’s) must be kept to 8 of less.

Sync frames and Dummy frames that do not transmit are not counted.

5. Select the options required under each individual frame type tab for Seq# types selected.

The following three diagrams show examples of different Flexible Over the Air frame sequences that

can be selected using the modular approach.

Figure 3-1: Example: Flexible Over the Air frame sequence (Balanced Protocol Weighting)

TDM Time Slots

Channel

Sequence A

6C TID Read

Request

Sync Block

6B Triple Page

Request

TDM Time Slots

Channel

Sequence A

6B Triple Page

Request

Sync Block

6C TID Read

Request

Channel Sequence A

IAG Read Only

TDM Slot 1: CH1