Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 57 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

2. Enter the Plaza ID and Agency ID in the fields at the top of the screen.

3. Select the Transaction Number Programming check box to choose how the Reader determines the toll

transaction number.

4. Click the Transaction Number Programming drop-down list.

5. Select the desired transaction numbering calculation from the drop-down list.

6. The following checkboxes should appear checked; if not, make sure you check them.

• TC Date/Time

• RW Format

• Lane number

7. Select the OBU Feedback check box to enable OBU (tag) feedback.

8. Assign a Lane Number to each RF Port.

Note: When a transaction occurs between an OBU and a Port, the Lane Number specified here

will be used when recording the transaction in OBU memory.

Configuring OBU Feedback for TDM

If OBU Feedback is selected as enabled in the TDM Toll Collection panel it is necessary to set up the

OBU feedback settings

Select the OBU Feedback panel.

Result: The following screen appears.