Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 56 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Configuring TDM tag programming for Traffic Management Applications

1. From the Tag Programming screen, select the Enable TMP check box.

2. Select the Reader ID check box to enable writing the Reader ID to tags.

3. Enter a unique Reader ID.

4. Select the TM Date/Time check box to write the Reader TM time to tags.

Example: The following screen is shown.

Note: Reader ID is required to support Badger Style CRA operation.

Configuring TDM tag programming for Toll Collection applications

1. From the above Tag Programming screen, select the Enable TCP check box.

Result: The following screen appears.