Operations and Maintenance Manual

MPR 4.1

Reader Table of Contents

Confidential UM360479-100 Revision: Draft B4 Page 3 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

FCC License Notice:

This equipment emits RF signals. In order to operate this equipment the customer must

obtain a separate FCC Part 90 Site license for each location. In addition, the FCC ID

component identification JQU802890, must appear on a label on the front of the MPR 4.1

Reader.

Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

The power output of a Reader at ambient (P

out(amb)

) shall be constrained using internal or

external Tx attenuation so that the following is satisfied:

out(amb)

<= 43.77 dBd - G

fund

;

Where G

fund

is the net gain from antenna connector on the Reader to the antenna radiated

signal. The antenna gain is expressed in dBd. P

out(amb)

is expressed in dBm