Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 46 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Note2: After making changes in data field (Textbox, Checkbox, Toggle switch etc.), set data

field out of focus to accept changes and new settings will be updated in the reader automatically .

The Frequency and RF Attenuation settings are often set on site as part of lane tuning.

Prerequisites: Connect a service laptop to the Reader LANE CONTROLLER port adapter to access the

Web interface. Refer to Connecting a service laptop to the Reader, page 34.

1. Go to Dashboard page Configure panel.

Result: The following screen appears.

Table 3-4: Configuration page

Configuration Page

Function

General

Configure Site Information, Network settings, SNMP and Reader Statistics.