Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 45 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Configuration via Web

The reader provides the ability to configure the reader operation via the web interface. There are

multiple configuration screen tabs available, each with multiple parameter settings. A list of settings

available and their function is provided in Appendix D

The tabs listed in Table 3-4 are available in configuration. It is recommended that the following order

is used in setting a new configuration to ensure all necessary parameters are set:

• General

• Lane Assignment

• Tag Protocol – Frame Sequence, Tag programming

• Channel and Group

• Lane Controller

Note1: The parameters available in some screens, or the ability to change them, in some

cases are dependent on enabling settings in other screens first.