Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 35 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Testing the connection to the reader

5. In Windows, go to the Search box at the bottom of the Start menu.

6. Type ‘ping’, followed by the Reader LC Port IP address.

Note: Ping response times are less than 2ms on average.

7. Press Enter.

Result: Several replies from the Reader IP address display momentarily in a DOS window. You are

ready to access the Web interface (see Accessing the Web interface page 35).

Note: If a reply is not received during the test, check the cable, connections, and IP addresses,

then repeat step 5.

Accessing the Web interface

The Web interface monitors and configures the MPR 4.1.

Prerequisites: A service laptop connected to Lane Controller port, accessing the Web interface.

1. Launch the web browser on the computer.

Note: You can use recent versions of any popular browser.

ATTENTION: When using certain versions of Internet Explorer, you may experience

missing strings of text when a screen displays. Press Control and F5 (CtrlF5)

simultaneously. This action clears the buffer and refreshes the screen.

Note: The default IP address of the Lane Controller port is 192.168.1.50. The IP address may

change during installation.

2. Consult the record of system IP addresses to determine the correct IP address. See Appendix A.

3. In the address bar of the web browser, type: https:// followed by the IP address of the Lane Controller

Port.

4. Use the following decision table to continue the procedure.

IF …

THEN …

you click the Login button and a dialog box

requesting a username and password appears,

go to step 5.

a 403 Forbidden error message appears,

ensure the IP address entered in the address bar is correct

and that the IP address is preceded by https://

Note: When you connect to the Reader with the laptop for

the first time accept the secure certificate before

continuing.