Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 34 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

8. Review the settings.

9. Click to applay the settings.

Connecting a service laptop to the Reader

You can use a service laptop to access the web interface by connecting directly to the Lane Controller

port.

Changing the service laptop IP address

1. In Windows, go to Start → Control Panel → Network and Sharing Center → Change Adapter Settings

→ Local Area Connection → Properties → Internet Protocol Version 4 (TCP/IP v4) → Properties.

2. Select Use the following IP address, then enter the IP address using the Reader network number in the

first three fields (ex. 192.168.1._ ) followed by a unique host number in the fourth field.

3. Enter 255.255.255.0 in the subnet mask and leave the default gateway blank.

4. Click OK