Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 29 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Channels

Select to access the configuration on Channels and Channel groups

Tag Protocol

Select to access the configuration on Frame and Firing Sequence, TX and

RX attenuation of enabled protocols, Protocol Frequency, Tag

Programming and Advanced options.

Lane Assignment

Select to access the configuration on Lane Assignment algorithm, Inter-

reader, TDM Low and Early Read logic.

Lane Controller

Select to access the configuration on Lane Controller interface, Destination

and Reporting modes

Time

Select to set Reader Date, Time and Time Zone, disable/enable Network

Time Protocol (NTP).

Save / Load

Select to manage Reader Configuration, upload, download as well as reset

reader configuration to defaults.

Reader Software

Select to manage Reader Software, upload, activate or delete software

version.

Log out

Select to quit session and log out of the system.