Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 239 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
TCP layer) before the
Reader will forcibly close
the connection. This
feature can be used to
detect the presence of link
drops (e.g. cable
disconnects and/or peer
crashes), especially if
Ethernet Heartbeats have
been disabled.
Time Page
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Network Time
Protocol
Set toggle switch to
ON to enable NTP.
user with
Change
Configuration
permissions
NTP___
0
0-1
Enables or disables setting
the Reader time via an NTP
server
to ensure readers are time
synced to a time server.