Operations and Maintenance Manual

MPR 4.1

Reader

Operating Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 22 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

MPR 4.1 system components

An MPR 4.1 reader System consists of the following components:

• MPR 4.1 Reader shown in Figure 2-1: MPR 4.1 Reader with four multiplexed ports,

• An antenna shown in Figure 2-4.

Additional installation components required are:

• An RF cable from Reader to Antenna

• Sealing tapes for RF connectors exposed to weather

• Lightning arrestors

• Optional Ethernet switch modules (ESMs)

• Sync and inter-reader Ethernet cabling (if required)

• Ethernet cables

Additional Site requirements are:

• DC Power and grounding,

• Mounting structure for the MPR 4.1 and the antenna

• Mounting Hardware for the MPR 4.1

Figure 2-1: MPR 4.1 Reader