Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 237 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
communications link loss
with the Lane Controller.
Initial Read Report
(IREAD) Message
Buffering
Set toggle switch to
ON to enable
buffering.
user with
Change
Configuration
permissions
LcIrBf
0
0-1
If enabled, the Reader
buffers Initial Read Report
(IREAD) messages in the
event of a communications
link loss with the the Lane
Controller.
Departure Report
Message Buffering
Set toggle switch to
ON to enable
buffering.
user with
Change
Configuration
permissions
LcDrBf
0
0-1
If enabled, the Reader
buffers Departure Report
messages in the event of a
communications link loss
with the the Lane
Controller.
TCP (Long-Lived)
Keepalive Time
(sec)
Input time in
seconds.
user with
Change
Configuration
permissions
LcTKaT
10
5-7200
Specifies the time (in
seconds) a TCP Long-Lived
connection between the
Reader and the Lane
Controller needs to remain
idle before the Reader