Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 236 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Dual-Destination
Buffering Mode
Select mode from
the drop-down list.
user with
Change
Configuration
permissions
LCDDBM
Fully
Independent
Standard (Legacy)
Fully Independent
Specifies how Dual-
Destination message
buffering is to be
performed. Select
'Standard (Legacy)' mode
to have buffering starts
when both Ethernet and
Dual-Ethernet links are
down, buffered messages
are drained when both
Ethernet and Dual-Ethernet
links are resumed. Set to
'Fully Independent' to have
fully independent buffering
between the Ethernet and
Dual-Ethernet links when
link failures occur.
Status Message
Buffering
Set toggle switch to
ON to enable
buffering.
user with
Change
Configuration
permissions
LcStBf
0
0-1
If enabled, instructs the
Reader to buffer status
messages in the event of a