Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 230 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Configuration
permissions
eATA 8-bit ASCII
Alphanumeric (2)
Combined
UID+eATA (3)
Suppress 6B Clone
Tags
Set toggle switch to
ON to suppress
report.
user with
Change
Configuration
permissions
NO6BCT
1
0 - 1
If enabled, instructs the
Reader to suppress the
reporting of 6B Clone Tags.
ATA Tag Report
Filtering/Threshold:
From the LC tab on
the Configure
panel, select the
ATA Tag Report
Filtering/Threshold
checkbox
user with
Change
Configuration
permissions
ATAFLT
0
Disabled 0
Enabled:1 Read
Enabled:2 Reads
Enabled:3 Reads
Use this option to perform
filtering of ATA tag reports
(Voting, Post Capture)
based on a set handshake
count threshold.
Sets the minimum number
of ATA tag reads that must
occur on any given channel
before a given tag is
processed and/or reported
to the Lane Controller.