Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 227 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Post-Capture-Zone
Report
Set toggle switch to
ON to enable
report type for all
tag protocols.
user with
Change
Configuration
permissions
PCZRPT
0
0-1
Used to choose to generate
and potentially send a post-
capture-zone report
Post-Capture-Zone
Voting Time
(multiples of VT)
With Post-Capture-
Zone Report
enabled, input
multiple count for
all tag protocols.
user with
Change
Configuration
permissions
PCZRTx
1
1 - 5
Specifies how many
multiples of VT to wait after
voting time to perform
post-capture-zone report
calculations.
Departure Report
Set toggle switch to
ON to enable
report type for all
tag protocols.
user with
Change
Configuration
permissions
EVSRPT
0
0-1
Used to choose to generate
and send an Estimated
Vehicle Speed report
Departure Report
Delay (ms)
With Departure
Report enabled,
input delay for all
tag protocols.
user with
Change
Configuration
permissions
EVSMSS
1000
100 - 9999
Specifies the delay to send
departure report after a tag
is last seen.