Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 225 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
messages enabled,
enter interval time
in seconds.
Configuration
permissions
i.e. how often heartbeat
messages are sent from the
Reader to the LC.
Lane Controller Page: LC Destinations Panel
(set Advanced toggle switch to ON to show more settings)
Destination
Select checkbox to
enable Ethernet
and/or Dual
Ethernet for each
RF channel
user with
Change
Configuration
permissions
LCDEST
1
0 - 15
Specifies the type of
interface (Ethernet, Dual
Ethernet) communication
with the lane controller.
Destination IP
Address and Port
Select Ethernet
checkbox and input
ip address in field.
user with
Change
Configuration
permissions
LCIPPT
N/A
N/A
This specifies the
destination IP address and
port.
Dual Destination IP
Address and Port
In Advanced mode:
select Dual
Ethernet checkbox
user with
Change
Configuration
permissions
LC2IPP
N/A
N/A
This specifies the Dual
Destination IP address and
port.